Feedback
ICR News
ICR completes 25000 audits in Jan. 2012 since its inception in India ICR awards receives a huge response from SME of different sectors at different places in the country ICR is soon planning to become associate member and get registered with AIMA, CII, FICCI & D&B, NABCB Hot Brand from ICR becomes fastest growing SME award in its category Referral scheme of ICR is big hit among its existing customers ICR donates 1% of the Certification fees of every client to provide education to poor children

CE Certification

The CE mark is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directives. The letters 'CE' are an abbreviation of Conformité Européenne, French word for European conformity. The CE mark must be affixed to a product if it falls under the scope of 'New Approach' Directives of European union.

Without the CE marking, and thus without complying with the provisions of the Directives, the product may not be placed in the market or put into service in the fifteen member states of the European Union and Norway, Iceland and Liechtenstein. However, if the product meets the provisions of the applicable European Directives, and the CE mark is affixed to a product, these countries may not prohibit, restrict or impede the placing in the market or putting into service of the product.

The CE Mark is compulsory within the context of the application of EC New Approach Directives. Thus, CE marking can, be regarded as the product's 'trade passport' for Europe.

KEY DIRECTIVES
  • Machinery Safety - 98/37/EEC
    All Machines in the European Economic Area (EEA) from January 1st 1995 must comply with the Machinery Directive and be safe. Also all components which are supplied separately to fulfill a safety function when in use and the failure or malfunctioning of which endangers the safety or health of exposed persons.
  • EMC - 2004/108/EC
    The EMC Directive applies to apparatus liable to cause electromagnetic disturbance or the performance of which is liable to be affected by such disturbance.
  • Low Voltage Equipment - 2006/95/EC
    The Low Voltage Directive applies to all electrical equipment designed for use with a voltage rating between 50 and 1,000v for alternating current and between 75V and 1,500V for direct current. These voltage criteria define the scope of the directive rather than the limit at which you start applying the regulations (e.g. hazards in 12Vdc circuits of a 240Vac supplied computer are covered under the LVD).
  • Pressure Equipment - 97/23/EC
    This directive covers equipments which affects equipment operating at a pressure greater than 0.5 bars, entered into force and is mandatory from May 2002.
  • Medical Devices General - 93/42/EEC
    All medical products marketed in European Union must carry the CE Marking under Medical Device directive. There are essential requirements in the MDD (such as safety, efficacy and EMC), and products must meet all applicable requirements.
  • Construction Products Directive - 89/106/EEC
    Construction Product means any products, which is produced for incorporation in a permanent manner in construction works, including both building and civil engineering works.
  • Personal Protective Equipment Directive - 89/686/EEC
    All devices or appliances and integrated units of several devices or appliances designed to be worn or held by an individual for protection against one or more health and safety hazards or the execution of specific activity.
  • Toys Safety- 88/378/EEC
    This Directive shall apply to toys. A 'toy' shall mean any product or material designed or clearly intended for use in play by children of less than 14 years of age.
  • Simple Pressure Vessel - 87/404/EEC
    'Simple pressure vessel' means any welded vessel subjected to an internal gauge pressure greater than 0,5 bar which is intended to contain air or nitrogen and which is not intended to be fired with maximum working pressure of the vessel shall not exceed 30 bar and the product of that pressure and the capacity of the vessel (PS·V) shall not exceed 10 000 bar / litre and minimum working temperature must be not lower than minus 50 °C and the maximum working temperature shall not be higher than 300 °C for steel and 100 °C for aluminum or aluminum alloy vessels.

OTHER DIRECTIVES

Gas Appliances Directive - 90/396/EEC
Lifts Directive - 95/16/EC
Drag Lifts Directive - 2000/9/EC
Efficiency of Hot Water Boiler Directive - 92/42/EEC.
Transportable Pressure Equipments Directive - 99/36/EC
Radio & telecommunication Terminal Equipment- 99/5/EC
Packaging & Packaging Waste. - 94/62/EC

Apply for Certification at info@icrindia.com

ICR offers various services worldwide and these services with accreditations where applicable, whilst following uniform management system, are operated by separate legal entities within the group. For status of individual scheme and accreditation, contact ICR office or email at info@icrindia.com